Continuous warm grey microcement floor

Microcement

Microcement in Medellín

A continuous, hand-troweled finish just 2 to 3 millimetres thick, laid straight over the tile you already have. We transform bathrooms, kitchens and floors in days, with no demolition and no rubble in your building. You see the finished room and a fixed price before any work starts, and we speak English from the first message to handover.

Timing

5 to 8 days on site

Includes

Design, tile preparation, primer, microcement coats, sealing and a 1-year written guarantee

01See the design before any work
02A fixed price
03Pay in stages
04A written guarantee, one person responsible

What's included

Microcement &
everything inside it

01

Visit and design

Gio visits, measures and photographs the space in about 20 minutes. You get the finished room in 2 or 3 colour options, each with a fixed price.

02

Tile check

We tap every tile. Any that sound hollow come out and get filled before we start, because microcement is only as solid as what sits under it.

03

Preparation, no demolition

We degrease, sand back the glaze and apply a bonding coat. Floors and showers get an epoxy primer with silica sand for a grip that holds under water and foot traffic.

04

Waterproofing where it matters

Microcement is a finish, not a waterproofing layer. Showers get a membrane underneath when the substrate calls for it, and three coats of sealer on top.

05

Hand-applied coats

Two or more thin coats, sanded between each one, in the colour you approved on a physical sample. Every wall ends up continuous, without a single grout line.

06

Sealing for the room

Two coats on dry walls, three on floors, showers and kitchen splashbacks. The sealer protects against water, grease and stains and sets the sheen: matte, satin or a little more.

07

Handover and care

We clean, walk you through every surface (in person or on a video call) and leave the care instructions and the 1-year guarantee in writing.

Materials we use

What you don't see counts too.

Two-part microcement
White cement, fine mineral fillers and an acrylic polymer for grip and flexibility. The polymer is what separates real microcement from a plaster skim that cracks.
Bonding coat and epoxy primer
The bonding coat for walls over tile; the epoxy primer with sand for floors and showers, where the bond has to survive water and daily use.
Fibreglass mesh
At the edge between tile and another material, or over a settled hairline crack, so the line never ghosts through the finish.
Mineral pigments
Oxides that don't fade in sunlight. We weigh every mix and record the formula, so a future touch-up matches the original.
Polyurethane or epoxy sealer
Clear and water-resistant, chosen for the room: more flexible on walls, harder on floors and wet areas.
Waterproofing membrane
Under the microcement in showers and anywhere that takes direct water. This is the layer that actually keeps water out of the wall and away from the neighbour below.

How we work

See it before it's built.

1

Visit

Gio comes, measures and takes photos. About 20 minutes.

2

Design and price

You get 2 or 3 design options and a fixed price for each.

3

Build

We make it, install it and hand it over with a written guarantee.

Timing

A full bathroom over existing tile takes 5 to 8 days on site: a day of preparation, two to three days of coats with drying and sanding in between, and one to two days of sealing. You can use the bathroom gently 48 hours after the last coat of sealer and normally after 7 days. A living-room floor or an open kitchen can take a few more days depending on the area. If you are abroad, you get photos and video at each stage, so you see the work without flying in.

Guarantee

A written 1-year guarantee against lifting, cracks that don't come from the substrate, and loss of seal. You deal with us and only us: one person responsible from start to finish, never a subcontractor you have to chase. It doesn't cover impact damage, harsh or acidic cleaning products, or leaks from elsewhere, such as a pipe inside the wall or the apartment above.

Designs: microcement

Designs we can build.

Dark grey microcement bathroom with floating walnut vanity
Dark grey microcement bathroom with floating walnut vanityI want this
Sand microcement bathroom with arch and stone tub
Sand microcement bathroom with arch and stone tubI want this
Sage microcement bathroom with oak vanity
Sage microcement bathroom with oak vanityI want this
Light grey microcement apartment bathroom with LED mirror
Light grey microcement apartment bathroom with LED mirrorI want this
Blue and terracotta microcement bathroom
Blue and terracotta microcement bathroomI want this
Spa master bathroom with double vanity and organic LED mirror
Spa master bathroom with double vanity and organic LED mirrorI want this
Sand microcement shower with lit niche
Sand microcement shower with lit nicheI want this
Microcement countertop and splashback
Microcement countertop and splashbackI want this

See every design

Questions

What people ask.

Do you have to tear out the old tile for microcement?
No. Microcement goes straight over your existing tile, as long as it's firmly bonded. We only remove tiles that sound hollow, prepare the surface and apply on top. No demolition means no rubble, no heavy dust and far less noise, which building administrations in Medellín appreciate.
How much does a microcement bathroom cost in Medellín?
It depends on the size, the materials and the finishes you choose, so we don't publish prices for made-to-measure work. Gio comes and measures in about 20 minutes, then you get 2 or 3 design options, each with a fixed price, installed and guaranteed. Send photos and rough measurements on WhatsApp and we'll give you a steer the same day.
How long does a microcement bathroom take?
5 to 8 days on site. Microcement goes on in thin coats that each need to dry and be sanded, and the sealer needs its own time. The bathroom is usable with care after 48 hours and fully after 7 days. For a rental, we plan the dates around your bookings.
Is microcement waterproof enough for a shower?
Yes, when it's done properly. The waterproofing comes from the membrane underneath where needed and the three coats of sealer on top, not from the microcement itself. Shower floors also get an epoxy primer so the bond holds up to water every day.
Can you use microcement on floors and in kitchens?
Yes. On living, bedroom and kitchen floors it goes over the existing ceramic or concrete and adds only about 3 millimetres, so doors rarely need trimming. In kitchens it works very well on walls and splashbacks. For a worktop you use every day we recommend quartz, which handles knives and heat better; we keep microcement for islands and bars with lighter use.
Does microcement crack?
Not if the base is solid and the mix has enough polymer. Cracks almost always come from a loose tile or a wall that moves, which is why we check everything first. If you prefer, floors and showers can get a sealer with an anti-slip texture.
Can I manage a microcement job from abroad?
Yes. Gio visits and measures, you approve the design and the fixed price on a video call, and you pay in stages. During the work you get photos and video of each step in English, and the building administration is handled for you. You can see the finished room for the first time when you land.
How do I look after a microcement finish?
Clean it with water and a neutral soap. Avoid neat bleach, acids, strong limescale removers and abrasive pads, which wear the sealer down. On busy floors, the top coat of sealer should be renewed every few years; it's a one-day job.

Where we work

El Poblado · Laureles · Envigado · Sabaneta · Belén · Estadio · La América · Calasanz · Itagüí · Bello · Rionegro · Llanogrande · El Retiro

We also do

See it before it's built.

Send us a photo of your bathroom

Message us on WhatsApp with photos of the space and its rough size. Gio replies the same day, in English, and books the visit. See the design before any work. A fixed price. Pay in stages.